* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
Ingyenes szabványos szállítás 9.9 $ feletti rendelés esetén
Visszatérítési politika
A termékek visszaküldését 40 napon belül elfogadjuk a termék átvételének dátumától számítva. A testreszabott termékeket nem lehet visszaküldeni vagy kicserélni. Az e-ajándék kártyával vásárolt termékek csak cserélhetők; a visszatérítés nem alkalmazható.
Ingyenes ajándék
Üdvözöljük a Roymall-ban, a prémium áruház ajándékok vásárlásának szakmai weboldalán. Nagyra értékeljük és köszönjük a támogatásodat, és hálánk jeléül extra izgalmat adunk a vásárlásaidhoz. Amikor nálunk vásárolsz, nemcsak kiváló minőségű termékeket kapsz, amelyek javítják az életminőségedet, hanem minden rendelésed mellé egy exkluzív ingyenes ajándékot is kapsz. Készen állsz a gyűjteményünk felfedezésére és a tökéletes ajándékok megtalálására? Böngéssz a prémium áruház termékeink között, add le a rendelésed, és várd az ingyenes ajándékod izgalmát, amely a vásárlásoddal együtt érkezik.
Szállítási politika
Keményen dolgozunk azon, hogy a rendelésedet követően biztonságosan kiszállítsuk a termékeket. A szállítási részleteket a visszaigazoló e-mailben kapod meg.A legtöbb esetben a rendeléseket 2 napon belül feldolgozzuk. Különleges körülmények között a késés a következő lehet: Ha szombaton, vasárnap vagy ünnepnapon rendelsz, a rendelésed 2 napot késik.Általában 5-7 munkanap (hétfőtől péntekig) szükséges, ha nincs késés a repülőjáratban vagy más környezeti tényezők miatt.Mivel szállítási szolgáltatásunk világszerte elérhető, a szállítási idő a helyzetedtől függ, így néhány napig is eltarthat, és ha távoli területen vagy országban élsz, kérjük, legyél türelemmel.
1. Visszatérítési és csere politika
Csak a roymall.com oldalon vásárolt termékeket fogadjuk vissza. Ha helyi disztribútornál vagy más kiskereskedőnél vásároltál, nem tudod visszaküldeni a terméket hozzánk.A végleges eladású termékeket vagy ingyenes ajándékokat nem lehet visszaküldeni.A visszaküldéshez a terméknek használatlannak és eredeti állapotában kell lennie. Eredeti csomagolásban kell lennie.Miután megkaptad tőlünk a visszaküldési utasításokat, csomagold be a visszaküldendő termékeket, és hagyd a csomagot a helyi postán vagy más futárnál.A visszaküldött vagy cserélt terméket 3-5 munkanapon belül feldolgozzuk, miután megkaptuk. A visszatérítést automatikusan feldolgozzuk és jóváírjuk az eredeti fizetési módodra.Nem fogadunk el visszaküldést vagy cserét, ha a termék egyedi gyártású, beleértve az egyedi méretet, színt vagy nyomtatást.További segítségre van szükséged? Lépj velünk kapcsolatba. service@roymall.com vagy Whatsapp: +8619359849471
2. Visszatérítési politika
Teljes visszatérítést vagy 100% bolti kreditet kapsz, miután megkaptuk és ellenőriztük a visszaküldött csomagot. A visszatérítést automatikusan feldolgozzuk és jóváírjuk az eredeti fizetési módodra.Kérjük, vedd figyelembe, hogy a szállítási költségek és minden vám vagy díj nem visszatéríthető. A további szállítási költségek nem visszatéríthetők, miután a csomagot kiszállítottuk. Felelős vagy ezen díjak fizetéséért, és nem tudunk eltekinteni tőlük, vagy visszatéríteni, még akkor sem, ha a rendelést visszaküldöd hozzánk.Ha bármilyen problémád van a visszatérítési folyamattal, lépj velünk kapcsolatba. service@roymall.com vagy Whatsapp: +8619359849471
MA-RX42 4CH AFHDS 2A PWM Micro Compatible Receiver Built-in 5A Brushed ESC for Flysky Radio Transmitter RC Airplane
The MA-RX42 series receiver is a newly designed micro compatible receiver for micro model aircraft. It provides 4 independent output interfaces and a built-in 5A brushed ESC output interface. It also supports PWM signal output. Currently available is the V2 version.
Note: This is a FlySky AFHDS 2A compatible receiver, which is no wires included.
Specification: Size: 18.5*12.0*6.5mm (not including antenna) Weight: 0.9g Working voltage: 3.0~5.0V
Features:
With built-in 5A/1S brushed ESC
Support connecting external brushed ESC or brushless ESC Supports brushless ESCs above 2S (requires BEC output 5V) Modified and perfected binding program (DSMX/2)
Port diagram:
Auto binding In order to solve the problem of being unable to press the frequency binding switch after the receiver is installed inside the aircraft, we developed the automatic frequency binding function. When the receiver does not receive a signal within 15 seconds after powering on, the receiver will automatically enter the binding mode (the LED on the receiver changes from slow flashing to fast flashing), and then complete the binding according to the binding operation of the remote control.
Built-in brushed ESC locking function: The built-in brushed ESC lock function is to prevent the brush motor from starting accidentally. After adding this function, the brush motor will not start due to the change of the position of the throttle lever on the remote control after the receiver is powered on. After the receiver is powered on and receives a signal, when the throttle lever on the remote control is held at the lowest position for about 2 seconds for the first time (at this time, the LED on the receiver dims for about 2 seconds and then brightens again), the built-in brush ESC lock will be released. You can then push the throttle lever to start the brushed motor.
Binding method: Power on the receiver first. After the receiver LED flashes quickly, turn on the transmitter for binding. If the red LED of the receiver is always on, it means the binding is successful. The AFHDS 2A protocol can be used to return the working voltage of the receiver.
The AFHDS protocol is slightly different: after the receiver LED flashes quickly after powering on, the transmitter is turned on and the receiver LED changes from fast flashing to slow flashing. At this time, the transmitter is turned off and on again, and the receiver remains unchanged. At this time, the receiver LED It is always on and can be used normally!
The standard aircraft model (PWM) mode is 4CH with 5A brushed ESC; the multi-axis flight control (PPM) mode is 8CH, operating voltage: 3-5V, the interface uses 1.0mm JST, and the h0rizon interface is same.
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
showing 1-10 of 10|
Show Original
A part of the QA has been auto-translated.
0
Q:
What female connectors are needed to connect to the male throttle, rudder, elevator, and aileron connectors on the receiver board?
What female connectors are needed to connect to the male throttle, rudder, elevator, and aileron connectors on the receiver board ?
Si può fare tutto, basta rispettare le specifiche della ricevente: 1S (3.3-4.2V) e assorbimento massimo di 5A (non continui). Testa prima il tuo motore out runner con un ESC Meter oppure alimentatore da banco e valuta l'assorbimento..
You can do anything, as long as you respect the specifications of the receiver: 1S (3.3-4.2V) and maximum current of 5A (not continuous). First, test your out runner motor with an ESC Meter or bench power supply and evaluate the current consumption.
Answered by simole88 on 31/10/2024Helpful (0)
0
Q:
How does this receiver connect with an outrunner motor
How does this receiver connect with an outrunner motor
C'è una ricevente identica a questa, ma con ESC per motori brushless da 1S integrato. Cmq puoi usare anche questa collegando alla porta THR un ESC brushless, ma il peso, fili e l'ingombro totale del tuo modello aumenterà inevitabilmente
There is a receiver identical to this one, but with an ESC for brushless motors from 1S integrated. However, you can also use this one by connecting a brushless ESC to the THR port, but the weight, wires, and the total size of your model will inevitably increase.
Answered by simole88 on 31/10/2024Helpful (0)
0
Q:
Is this receiver compatible with Futaba SFHSS?_Paulf
Is this receiver compatible with Futaba SFHSS?
Paulf