* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
Ingyenes szabványos szállítás 9.9 $ feletti rendelés esetén
Visszatérítési politika
A termékek visszaküldését 40 napon belül elfogadjuk a termék átvételének dátumától számítva. A testreszabott termékeket nem lehet visszaküldeni vagy kicserélni. Az e-ajándék kártyával vásárolt termékek csak cserélhetők; a visszatérítés nem alkalmazható.
Ingyenes ajándék
Üdvözöljük a Roymall-ban, a prémium áruház ajándékok vásárlásának szakmai weboldalán. Nagyra értékeljük és köszönjük a támogatásodat, és hálánk jeléül extra izgalmat adunk a vásárlásaidhoz. Amikor nálunk vásárolsz, nemcsak kiváló minőségű termékeket kapsz, amelyek javítják az életminőségedet, hanem minden rendelésed mellé egy exkluzív ingyenes ajándékot is kapsz. Készen állsz a gyűjteményünk felfedezésére és a tökéletes ajándékok megtalálására? Böngéssz a prémium áruház termékeink között, add le a rendelésed, és várd az ingyenes ajándékod izgalmát, amely a vásárlásoddal együtt érkezik.
Szállítási politika
Keményen dolgozunk azon, hogy a rendelésedet követően biztonságosan kiszállítsuk a termékeket. A szállítási részleteket a visszaigazoló e-mailben kapod meg.A legtöbb esetben a rendeléseket 2 napon belül feldolgozzuk. Különleges körülmények között a késés a következő lehet: Ha szombaton, vasárnap vagy ünnepnapon rendelsz, a rendelésed 2 napot késik.Általában 5-7 munkanap (hétfőtől péntekig) szükséges, ha nincs késés a repülőjáratban vagy más környezeti tényezők miatt.Mivel szállítási szolgáltatásunk világszerte elérhető, a szállítási idő a helyzetedtől függ, így néhány napig is eltarthat, és ha távoli területen vagy országban élsz, kérjük, legyél türelemmel.
1. Visszatérítési és csere politika
Csak a roymall.com oldalon vásárolt termékeket fogadjuk vissza. Ha helyi disztribútornál vagy más kiskereskedőnél vásároltál, nem tudod visszaküldeni a terméket hozzánk.A végleges eladású termékeket vagy ingyenes ajándékokat nem lehet visszaküldeni.A visszaküldéshez a terméknek használatlannak és eredeti állapotában kell lennie. Eredeti csomagolásban kell lennie.Miután megkaptad tőlünk a visszaküldési utasításokat, csomagold be a visszaküldendő termékeket, és hagyd a csomagot a helyi postán vagy más futárnál.A visszaküldött vagy cserélt terméket 3-5 munkanapon belül feldolgozzuk, miután megkaptuk. A visszatérítést automatikusan feldolgozzuk és jóváírjuk az eredeti fizetési módodra.Nem fogadunk el visszaküldést vagy cserét, ha a termék egyedi gyártású, beleértve az egyedi méretet, színt vagy nyomtatást.További segítségre van szükséged? Lépj velünk kapcsolatba. service@roymall.com vagy Whatsapp: +8619359849471
2. Visszatérítési politika
Teljes visszatérítést vagy 100% bolti kreditet kapsz, miután megkaptuk és ellenőriztük a visszaküldött csomagot. A visszatérítést automatikusan feldolgozzuk és jóváírjuk az eredeti fizetési módodra.Kérjük, vedd figyelembe, hogy a szállítási költségek és minden vám vagy díj nem visszatéríthető. A további szállítási költségek nem visszatéríthetők, miután a csomagot kiszállítottuk. Felelős vagy ezen díjak fizetéséért, és nem tudunk eltekinteni tőlük, vagy visszatéríteni, még akkor sem, ha a rendelést visszaküldöd hozzánk.Ha bármilyen problémád van a visszatérítési folyamattal, lépj velünk kapcsolatba. service@roymall.com vagy Whatsapp: +8619359849471
Features:
- DC5-48V automatic identification
- When the DC terminal has power, it is connected to the battery to charge
- The charging parameters have nothing to do with this module, depending on the DC terminal, battery, and load.
- Product load: 10A
- Product size: 61mm*29mm
Package Incldued:
1 x YX850 Power Failure Automatic Switching Standby Battery Lithium Battery Module
Good product functions as described. When connected to a DC source the load is always ON and when power fails the load is powered from the back up source i.e. battery.
To use this as an Emergency Lamp application for powering the load only through the battery or Inverter type cutover and not having the power on continuously, a simple mod is needed. I cut the DC Power source track that goes to the NC side of the relay (see photo), so the battery is charged when the source supply is on.
When the power fails the relay coil looses power and drops there by closing the NO contact and the circuit to the load is completed through the battery.
I also use a CV CC type of regulator as my DC normally ON power source and you can adjust the charging parameters for the specific battery in use. This PCB circuit is a pass through and does not influence any charging parameters as stated int he description.
There are literally 100's of applications for this product and overall highly recommended.
Good product functions as described. When connected to a DC source the load is always ON and when power fails the load is powered from the back up source i.e. battery.
To use this as an Emergency Lamp application for powering the load only through the battery or Inverter type cutover and not having the power on continuously, a simple mod is needed. I cut the DC Power source track that goes to the NC side of the relay (see photo), so the battery is charged when the source supply is on.
When the power fails the relay coil looses power and drops there by closing the NO contact and the circuit to the load is completed through the battery.
I also use a CV CC type of regulator as my DC normally ON power source and you can adjust the charging parameters for the specific battery in use. This PCB circuit is a pass through and does not influence any charging parameters as stated int he description.
There are literally 100's of applications for this product and overall highly recommended.
Good product functions as described. When connected to a DC source the load is always ON and when power fails the load is powered from the back up source i.e. battery.
To use this as an Emergency Lamp application for powering the load only through the battery or Inverter type cutover and not having the power on continuously, a simple mod is needed. I cut the DC Power source track that goes to the NC side of the relay (see photo), so the battery is charged when the source supply is on.
When the power fails the relay coil looses power and drops there by closing the NO contact and the circuit to the load is completed through the battery.
I also use a CV CC type of regulator as my DC normally ON power source and you can adjust the charging parameters for the specific battery in use. This PCB circuit is a pass through and does not influence any charging parameters as stated int he description.
There are literally 100's of applications for this product and overall highly recommended.
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
showing 1-8 of 8|
Show Original
A part of the QA has been auto-translated.
0
Q:
Hmm could you possibly use this with a solar panel as your “mains” – switching between charging a 18650 battery then also powering some very low power led lights? Thoughts anyone? Thank you.
Hmm could you possibly use this with a solar panel as your “mains” – switching between charging a 18650 battery then also powering some very low power led lights? Thoughts anyone? Thank you.
a). I want to connect a 20V DC to the Input Terminal: b). Connect a 11.1 volt Li ion Battery then
c). Connect 12v DC to load.
My questions are: Will the output remain constant at 12 .6 volt DC at "LOAD" ?
a). I want to connect a 20V DC to the Input Terminal: b). Connect a 11.1 volt Li ion Battery then
c). Connect 12v DC to load.
My questions are: Will the output remain constant at 12 .6 volt DC at "LOAD" ?